RFMAX RFID POWER MAPPER

RFMAX RFID POWER MAPPER

SPECIFICATIONS

ELECTRICAL:

  • Operating Frequency: Global (850-920 MHz)
  • Polarization: Linear

MECHANICAL:

  • Connector Type: Connector – Rear
  • Cable: Not Included
  • Dimensions: 4.13 x 2.76 x 1.77 in (105 x 70 x 45 mm)
  • Weight: 0.125 lbs (56.7 g)

PRODUCT DESCRIPTION

The RFID Power Mapper is a pocket size device that helps to map an RF field up to 15 meters (49 feet) in range for an RFID application. Only using RF power, this device is very sensitive and is capable of showing constructive and destructive interference patterns caused by multipath. It works with all known European and US UHF RFID readers and can indicate to the user where a Gen2 tag may or may not be readable. With the RFMAX Power Mapper you’re no longer working in the dark. This meter is specially designed to show nulls in the UHF radio field at large distances from the antenna. You will find it hard to believe how large the signal variation can be, even quite close to the antenna. The meter will show polarization effects and destructive null cancelations, ground and water absorption. The meter relies on the power in the radio waves, so it cannot give a fails reading or have a flat battery. Almost 100% of the signal on at the antenna is shown on the meter, giving a massive 10+ meters (30+ feet) range.

NEWSLETTER SIGNUP


GET IN TOUCH

CARDCore Group is a global leading multi-channel comparison service for Gift, Loyalty, Membership, RFID, SIM and Smart Card products. CARDCore provides businesses with the convenience of online comparison and the benefit of telephone-based advice.


ICMA Member
CARDCore Limited is a member of theĀ  International Card Manufacturers Association(ICMA).
Mail: info@cardcoregroup.com
Phone:

Malaysia +60 133 623 983

United States +1 917 720 3274

South Africa +27 110 835 056

United Kingdom +44 20 7193 3496

Address: Unit 8, Level 15, Menara One Mont Kiara, No. 1
Jalan Kiara, Mont Kiara, Kuala Lumpur, 50480, MALAYSIA